WALLUKS DECORATIVE & INSULATION SILKY PLASTER
WALLUKS Decorative & Insulated silky (Liquid wallpaper) is a product consisting of only organic and healthy raw materials. Components: The fabric parts are composed of acrylic fiber, polypropylene yarns, foamed styrofoam and natural adhesives. WALLUKS 67/548 / EC, 1272/2008 / EC, according to European Commission Regulation and the laws of Turkey, it is not classified as hazardous. The reports and certificates of the Turkish Standards Institute have fire, safety and conformity certificates. It has small surface imperfections and cracks, moisture-retaining, no odor, sun-fade, additional heat and sound insulation. Walluks applied very easily on the plaster provides a 60-70% reduction in time and repair costs. WALLUKS can be applied to any surface, columns, walls, ceilings, arches.
APPLICATION
The wall should be checked before application, the negative effects of the previously applied paint or other coating should be repaired and the faulty places should be repaired. Pour the product into a bucket of the appropriate size. Then add 10 liters of water, stir for 5 or 10 minutes, then let stand for 30 min. Application thickness should be about 2 or 3 mm thick. One package walluks covers the area between 4.5 - 5 m2 with an average thickness of 3 mm. Remember to open and ventilate windows after application. The average drying time of the product is 2 days.
1. Put 10 liters of water into the bucket.
2. Add a package of WALLUKS products into the bucket
3. Mix with mixer for 5 - 10 minutes
4. Allow the product to stand for 30 minutes. And then apply it to walls with special transparent trowel.
5. A package covers an area of 4.5 m2 - 5 m2 with an average thickness of 3 mm.
IMPORTANT ANNOUNCEMENT
1 . Adding too much water can cause some deformations and cause the surface to be crooked, curved. Or, if you add a small amount of water, the product may be hard and dry.
2. The water should be between +10 and + 30 ° C. Especially in winter, the water temperature should not be below + 15 ° C.
3. WALLUKS products are not applied at temperatures below +5 ° C.
4. WALLUKS products do not apply to surfaces of laminated materials such as MDF / HDF laminate, waterproof and smooth surfaces such as glass, ceramic and plastic.
5. WALLUKS products do not apply to high alkaline substrates.
6. Pay attention to the Season of the season and region. Make sure that the building walls are not damp, especially during rainy seasons. The fact that the building walls are still wet and rainfall will prolong the drying time, which will have a negative effect on the adhesion of the product.
